8 Tips For Carton Sealer Before Installation And Commissioning

carton sealer factory

Before purchasing a carton sealing machine, not only consider the sealing products, machine speed, cost, and other factors, but also consider the site, power and air supply, and safety issues.

The following are some suggestions for the installation and commissioning of the machine.

Before Installation

1 Proper Site

You must first know the size of the site and the surrounding obstacles before purchasing the machine, so that the installation of the carton sealing machine can proceed smoothly.

2 Enough Power And Gas Source

Enough air supply is important for carton erector and flap carton sealer. So you need to connect the power and air source before installing the carton sealing machine.

3 Professional Installation Technicians

The standard carton sealing machine is simple and can be used when plugged in. But some customized machine is complicated. So there should be professional technical personnel to guide during the installation and commissioning phase. Otherwise, unnecessary troubles may occur in the later.

Commissioning

1 Read The Operation Instructions

You must know the size of the site and the surrounding obstacles before purchasing the machine. So that the installation of the carton sealing machine can proceed smothly.

2 Keep Your Distance From The Running Machine

When operating the machine, the operator will not put his body part in the running position of the machine.

3 Turn Off The Power Supply And Air Source

When loading, unloading, and normal maintenance or repair, please be sure to turn off the power supply and air source to ensure safety.

4 Do not Approach Or Touch The machine Without Training

5 Cut Tape Off With Scissors When Changing The Tape

Many debuggers will cut off the tape with a cut knife of the carton sealing machine. It is dangerous! Because it will scratch the operator’s fingers. Thus, STING recommends that you try to use scissors to cut off the tape when replacing the tape.

When installing and debugging the machine, please pay attention to the above points. Otherwise, it may cause you some unnecessary troubles. Keeping in mind your safe is super important!

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Free Sample Test

Get Quote Now

We will usually reply to you within a working day